| Scout Traveler Factory Style Roll Bar |
| $255 Plus Shipping |
This model will fit a Scout Traveler, and was especially designed to get the best fit under a full
hardtop. It can also be used to fit behind a half-cab, or under a soft top.
We use sturdy, .120 wall HREW or CREW 2-inch steel tubing. We have a mandrel bender with
hydraulic attachment that makes unbelievably smooth and accurate bends. This bar is similar to
the original factory roll bar design, with some improvements. These will fit extremely well under
a full hard top, that's how we designed it.
This is a kit, and you will install it yourself. Kit includes the main hoop, two arms, and 6 custom
mounting plates. All joints that need to be welded are cut with a hole saw or sharp blade, so
everything will fit together very nicely. Nathan goes the extra mile to make sure everything
squares up and fits together well.
Installation will require the following (not necessarily in this order): The easiest way is to remove
your top for installation, then bolt in the welded up kit. The 2 right-angle mounting plates will
weld to the main hoop, the two arms will weld to the main hoop, then two of the rounded
mounting plates will weld to the arms. At this point you will at least want to primer the rollbar, to
deter surface rusting, then paint it if you like. Then the whole thing can be bolted in, and the
remaining two rounded mounting plates will install on the underside of the wheel wells. The
right-angle mounting plates will bolt to the step behind the front seats. You will need a good drill,
bolts, washers, nuts, and a welder to complete the project. Please keep in mind your kit will only
be as good as your welds, so it is best to have this welded by a professional if you aren't
comfortable doing it yourself.
hardtop. It can also be used to fit behind a half-cab, or under a soft top.
We use sturdy, .120 wall HREW or CREW 2-inch steel tubing. We have a mandrel bender with
hydraulic attachment that makes unbelievably smooth and accurate bends. This bar is similar to
the original factory roll bar design, with some improvements. These will fit extremely well under
a full hard top, that's how we designed it.
This is a kit, and you will install it yourself. Kit includes the main hoop, two arms, and 6 custom
mounting plates. All joints that need to be welded are cut with a hole saw or sharp blade, so
everything will fit together very nicely. Nathan goes the extra mile to make sure everything
squares up and fits together well.
Installation will require the following (not necessarily in this order): The easiest way is to remove
your top for installation, then bolt in the welded up kit. The 2 right-angle mounting plates will
weld to the main hoop, the two arms will weld to the main hoop, then two of the rounded
mounting plates will weld to the arms. At this point you will at least want to primer the rollbar, to
deter surface rusting, then paint it if you like. Then the whole thing can be bolted in, and the
remaining two rounded mounting plates will install on the underside of the wheel wells. The
right-angle mounting plates will bolt to the step behind the front seats. You will need a good drill,
bolts, washers, nuts, and a welder to complete the project. Please keep in mind your kit will only
be as good as your welds, so it is best to have this welded by a professional if you aren't
comfortable doing it yourself.
WARNING: These are technically considered show bars, as we cannot guarantee their
performance in case of a rollover. Off-roading and even highway driving are inherently
dangerous, and loss of life or other injuries can occur. We simply cannot be held responsible for
the performance of an installed kit. We have listed them as "rollbars" only so you could find them
using the eBay search engine. This is a kit, you are installing it, you are welding it, you are bolting
it, and therefore you are 100% responsible for it's performance and you cannot hold us liable for
any bodily or property harm. Sorry, but that's how it works with safety devices you will buy from
anyone, so we just had to say it. These are made to the best of our ability with good steel, but we
simply cannot take responsibility for their use. You all know a crazy off-roader, so you know why
this is so important. YOUR BID OR PURCHASE IS A LEGALLY BINDING ACCEPTANCE OF THIS
LIABILITY RELEASE.
PAYMENT DETAILS: Payment by credit card, debit card, or Paypal balance upon checkout.
We try to keep at least one of everything in stock. Nearly all shipments leave within 48 hours. If
we are out of stock, we will build you one ASAP. If we need to build you one, we will let you know
as soon as we get your order.
$100 FLAT SHIPPING TO ANY PHYSICAL ADDRESS IN THE LOWER 48 STATES
A NOTE ABOUT SHIPPING: This item will ship FedEx Ground, so you must have a confirmed, physical, street
address for delivery. Your roll bar is trackable and insured. PO Boxes, APOs, FPO's, Alaska, Hawaii, and
foreign address please email me for alternative options. Your rollbar will come nicely packaged, with lots of
plastic wrap and covered in bubble wrap.
Also, our apologies, but we cannot accommodate requests for custom changes. We do custom stuff, but it's basically impossible
without your rig in our garage. You will be pleased. If you are not, you can send back the kit and we will refund your money.
performance in case of a rollover. Off-roading and even highway driving are inherently
dangerous, and loss of life or other injuries can occur. We simply cannot be held responsible for
the performance of an installed kit. We have listed them as "rollbars" only so you could find them
using the eBay search engine. This is a kit, you are installing it, you are welding it, you are bolting
it, and therefore you are 100% responsible for it's performance and you cannot hold us liable for
any bodily or property harm. Sorry, but that's how it works with safety devices you will buy from
anyone, so we just had to say it. These are made to the best of our ability with good steel, but we
simply cannot take responsibility for their use. You all know a crazy off-roader, so you know why
this is so important. YOUR BID OR PURCHASE IS A LEGALLY BINDING ACCEPTANCE OF THIS
LIABILITY RELEASE.
PAYMENT DETAILS: Payment by credit card, debit card, or Paypal balance upon checkout.
We try to keep at least one of everything in stock. Nearly all shipments leave within 48 hours. If
we are out of stock, we will build you one ASAP. If we need to build you one, we will let you know
as soon as we get your order.
$100 FLAT SHIPPING TO ANY PHYSICAL ADDRESS IN THE LOWER 48 STATES
A NOTE ABOUT SHIPPING: This item will ship FedEx Ground, so you must have a confirmed, physical, street
address for delivery. Your roll bar is trackable and insured. PO Boxes, APOs, FPO's, Alaska, Hawaii, and
foreign address please email me for alternative options. Your rollbar will come nicely packaged, with lots of
plastic wrap and covered in bubble wrap.
Also, our apologies, but we cannot accommodate requests for custom changes. We do custom stuff, but it's basically impossible
without your rig in our garage. You will be pleased. If you are not, you can send back the kit and we will refund your money.
CLBM 2008
 |
 |
 |
 |
 |
 |
 |
 |
